Test Cu

Test Cu - express test for fast and accurate determination of copper concentration in aquarium, pond or pool water.

Specially developed composition makes it easy to determine the copper content in a wide range of concentrations, as well as in the presence of any compounds or complexes of copper.

The test should be used in the treatment of fish with copper-containing agents (rikka Paracid), the use of any copper-based remedy for algae control, with copper pipes in the water supply network and with shrimp content.

INSTRUCTION:

1.Wash measuring vial few times with water that is to be tested.

2. Add 5ml of water that is to be tested to measuring vial.

3. Add 5 drops of reagent №1 and shake.

4. Add 5 drops of reagent №2 and shake.

5. Add 5 drops of reagent №3 and shake.

6. Wait 5 minutes and compare the color with included color scale.

After measuring copper content, thoroughly wash the measuring vial.

Avoid indicator solution or water after testing getting into aquarium!

In order to get accurate measurements, the temperature of water that is to be tested must be 25±3°С, and room temperature must not be below 20°С.

Storage life: 24 months, but no more than 12 months since opening.

Keep at 10-25°С in dry dark place! Keep out of reach of childrenі!

Avoid skin contact! Upon skin contact wash with large amounts of water!